C6Amodul and C6Amodul Keystone
The connection system for a variety of applications
Intelligent system solution for structured cabling
Today, the need for high data transfer rates is enormous. This applies to public buildings and office complexes, but also for real estate and private real estate. A forward-looking, intelligent building cabling for a wide variety of uses is similar important to residents as basic building control systems.
It helps owners to manage their investments over the years as well as to minimize installation and maintenance costs. As a guide for planning and implementation of cabling systems there are national and international standards, however they only represent a basis. Important for a sustainable, structured building cabling are continuous, internationally standardized and powerful network solutions. These needs are covered by our C6Amodul and C6Amodul Keystone connection systems with Cat.6A. Because of their high system capability, the modules can be used in a wide variety of applications.
The highest compatibility for efficient use
Our connection system is consistent and compatible – a requirement for transparent, efficient and individual use of future-oriented network and cabling systems.
Performance overview C6Amodul and C6Amodul Keystone
This flexible, modular core of the system manages to ensure a general cabling basis, non-regarding which communication application is transmitted.
- GHMT Cat.6A re-embedded PVP certified
- Cat.6A component testing according to ISO/IEC 11801-1, EN 50173-1, GHMT certified
- Compliance with Class EA according to ISO/IEC 11801-1 and EN 50173-1
- Components tested up to 600 MHz, link tested up to 800 MHz
- 2 mounting version: module and Keystone
- 3 Variants of cable feeding: 90°, 180° and 270°
- Connection without special tools, short assembly and connection time
- Patch and installation cable can be connected in the sizes AWG 26/7–22/7 and AWG 24/1–22/1
- for 10BaseT, 100BaseT, ATM 155 MBit/s, Gigabit Ethernet, 10GBASE-T, suitable for remote powering (PoE, PoE plus, UPoE and 4PPoE), HDBaseT, SAT-IP and AVoverIP
- Robust and reusable zinc diecast module housing
- Intelligent cable management for heavily twisted cables
- Strain relief directly on the charging piece
- 360° shield connection
- A dust cover is optionally available
MC Modul or Keystone?
Our modules are available with different installation cut-outs (MC Modul and Keystone).
In different applications (such as wall outlets, patch panels, module frames, DIN rail housing REGplus, underfloor units, etc.), it is essential that the installation cut-out for the application is compatible with the installation cut-out for the module. Therefore, when choosing a module, it is important to consider its individual installation cut-out. The product specification provides all of the information you need to do so.
Installation cut-out – MC Modul design
Installation cut-out – Keystone design
MC Modul installation cut-out – benefits at a glance
the shape and associated installation type allow the module to be installed and removed securely and easily in applications (such as wall outlets, patch panels, ...)
applications can be manufactured from a wide range of different materials (plastic, stainless steel ...)
the pre-tensioned bracket made of highly conductive material runs through the entire module without any material changes
a consistently stable shielded connection is ensured for years, with minimal contact resistance from the connected installation cable to the inserted RJ45 patch cord
patch panels based on the MC Modul installation cut-out also ensure consistently low contact resistances, from the cable shielding to the module frame
Variants C6Amodul - Installation cut-out MC Modul
Variantes C6Amodul K - Installation cut-out Keystone
Versatile and universal - system solutions from a single source
The challenge to a future-oriented connection system, which can be used universally and flexible, is enormous. The C6Amodul and C6Amodul Keystone connection systems meet these complex requirements: This enables a use in a wide variety of applications, including the already existing applications of the E-DAT module system as well as in the Keystone applications on the market. The three versions of cable feeds permit a use even in small spaces.
Further advantages are the simple and cost-effective assembly without special tools as well as the direct use of switch manufacturer-labeled covers. Our network components forms a continuous system - from server via patch cable, patch panel and wall outlet up to the end device we offer compatibility from one source. The advantages of our system solutions are increased safety and a simplification of assembly and installation.
Applications for C6Amodul
High performance - Independent certification
The modules demonstrate high performance by meeting the Cat.6A component standard ISO/IEC 11801-1 for applications in the range up to 500 MHz bandwidth and 10 GBit Ethernet according to IEEE 802.3an. The C6Amodul is available as a component tested up to 600 MHz and in the link up to 800 MHz. The product quality is further enhanced by a robust zinc die-cast housing.
The connection system meets the requirements of the Cat.6A standards and is certified by an independent accredited test laboratory according to ISO/IEC 11801-1, TIA/EIA-568, IEC 60603-7-51 and EN 50173-1 tested and certified. By participating in the continuous and independent GHMT Premium Verification Program (PVP) and the resulting certification, you can be sure that you will always have a high-quality product. According to the above standard, the requirements of Class EA are also met in the permanent- and channel- link.
Download Brochure
