|

FAA 4 24 V AC/DC CAN

Description

CAN module with 4 analog outputs. It is suitable as encoder for control variables, for example for electrical vent and mixing valves, valve positions, etc. The fieldbus module is an output module for universal use. It is controlled by means of the CAN bus. The module is addressed by means of an adjustable address, and the output states are transmitted in data bytes. If there is an analog input module with the same address in the system, the voltage measured there is issued at the respective output.

Connection with screw type terminal blocks

Technical Data
General Data
CAN
00 to 99
2.0B passive (two-wire bus)
20 to 500 kBit/s
24 V AC/DC +/- 10 % (SELV)
90 mA (AC) / 32 mA (DC)
100 %
550 ms
4 x analog
0 V to 10 V DC
5 mA at 10 V DC
10 mV/digit
+/- 1 %
Green and red LED
35 x 69.3 x 60 mm
84 g
-5 °C to 55 °C
-20 °C to 70 °C
IP40 / IP20
Check US distributor inventory
Accessories
Part number
1105731302
4250184122524
Downloads
× Do you have any questions?